Arduino Shield Nixie Tubes Clock in. The Arduino Nixie Tubes Shiled NCS314-8C allow You to make 8 digits Nixie Tubes Clock in Divergence Meter Mini style (by GRA & AFCH). Or You can just display any 8 digits strings on this IN-14 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already inspiring peoples creativity, all over the world, everyday.PCB design, schematic, case and software made by GRA & AFCH. Nixie Clock Shield NCS314-8C compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform. The latest sources are always available on. Github at the "NixeTubesShieldNCS314" repository.
IN-14+IN-19A Arduno Shield NCS314-8C Nixie Clock in Clear Acrylic Case. Arduino Shield Nixie Clock in Acrylic Case with Columns. Temperature sensor (DS18B20) (included, external with PH2.0 connector). GPS Receiver (GA-6) (optional, choose in selector). IR Remote (RM-X153) (optional, choose in selector).Power Supply (12V, 1A) (US, EU, UK, AU) (included , optional AC plug). User Manual on vintage-style paper.
Temperature sensor with PH2.0 connector is optional for the Clock. Power Supply is included with the Clock. If you have ANY questions. Shield supports IN-14 Nixie tubes 8 pcs + IN-19 Symbolic Nixie tubes -1pc.Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS]. Slot Machine Anti poisoning tubes saving function. Temperature measurement [Celsius or Fahrenheit]. GPS time synchronization requires a standard GPS receiver, NMEA protocol, 5 V power supply. Operation via IR remote control Remote control Sony RM-X151. The maximum possible brightness of the tubes. Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test our soft check each segment on every lamp.
Distinguishable to see segment failure. Highly accurate RTC (Real Time Clock) DS3231SN with backup battery. Integrated high voltage power supply: 150 220V. 3 control buttons on board.
8 pcs RGB SMD LEDs. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.It can be disabled in the menu (please check the manual). Test points for testing, adjusting and controlling low and high voltage circuits. GPS receiver (only with Arduino Mega). IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote control.
The using of Arduino MEGA works fluently. Temperature sensor (DS18B20; 1-Wire protocol). Places for 3 column with 2 neon dots (digits separator). Independent controls for upper and lower dots.
Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive +).
Nixie Tubes Shield Clock size: 336 mm x 90 mm x 78 mm. Easy to build beautiful clock we also offer.Easy to customize firmware under Your own needs, thanks to an open platform Arduino. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Complete Power On Self-Test (POST): LED backlight, tubes and sound. IN-14+IN-19A Nixie Clock Shield NCS314-8C in Acrylic Case. The item "IN-14+IN19A Arduino Shield Nixie Clock in Acrylic Case WITH OPTIONS 9 TUBES" is in sale since Wednesday, December 23, 2020. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk.
This item can be shipped worldwide.